32 oz Can XL-8 Neoprene Rubber Cement
32 OZ can of
XL-8 cement is a versatile, low cost adhesive which has proven to be an outstanding all around, all-purpose cement.
XL-8 is widely used for bonding all kinds of porous and non-porous materials to each other or to themselves. XL-8 will bond leather, cork, cork to rubber, felt, fabrics, and many rubber compounds. XL-8 is used for bonding SBR Rubber and Neoprene to metals. XL-8 is not recommended for bonding pure gum rubber, vinyl film, or materials where the solvents used in XL-8 will affect the material itself, such as polystyrene.
Films from XL-8 have excellent water resistance, as well as high resistance to oil, heat, acids, alkalis, aliphatic solvents, and have excellent aging properties. Films have good shear strength, good dead load, and excellent peel strength.
XL-8 is an elastomer-resin blend which develops excellent film strength in a short time, which increases with aging until a maximum is reached. Bonding should be done within one half hour for best results.
XL-8 is used widely in the manufacture and repair of:
• Leather
• Cork
• Cork to Rubber
• Rubber Compounds
• Felt
• Fabrics
Technical Data:
Base:Neoprene
Color:Egg Shell White
Solvent:Toluene, Heptane, Ethyl Acetate, Acetone
Viscosity:Medium
Application:Brush, Pressure Flow Gun, etc.
Solids:18% (Approximately)
Net Weight:7.2 Lbs. per Gallon
Temperature Range:-30° to 200°F.
Tack Life:10 minutes to ½ hour
Shelf Life:18 Months
Flash Point:18°F.
Precautions:
Do Not Apply Below 40°F.
Do Not Exceed Temperature Limits.
Do Not Use Near Fire or Flame.
Use with Adequate Ventilation.